Map Viewer allows you to explore data in various ways through a variety of smart mapping styles. When you style map layers in Map Viewer, the nature of the data determines the default styling options. You can experiment with color ramps, line weights, transparency, symbols, and other graphic elements, and see your choices reflected immediately on the map.
You can style imagery layers in several ways depending on the type of data in the layer and what you want to highlight. When you are styling an imagery layer, only the options that are applicable to the layer are available in the Styles pane. For example, you can display multispectral or multiband imagery using a three-band red, green, and blue (RGB) color composite, but elevation data does not have this display option.
For information about changing the style or display of imagery layers in Map Viewer Classic, see Display imagery.
Stretch
Applying a stretch to continuous data allows you to apply various color ramps and enhance the contrast in your imagery layer. Stretching is helpful when you want to make certain features in a continuous dataset more obvious. For example, you can apply a stretch to clearly show areas of high elevation compared to low elevation in a digital elevation model (DEM).
To style continuous imagery data using the Stretch style, do the following:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Stretch style and click Style options.
- Optionally, click the Stretch Type drop-down menu and select from the list of options.
The following options are available:
- None—No additional image enhancements are performed.
- Minimum and Maximum—Display the entire range of values in the image. Edit the values in the statistics table to make additional changes as needed. These are available only when the Dynamic range adjustment check box is cleared.
- Standard Deviation—Display values between a specified number of standard deviations.
- Percent Clip—Set a range of values to display, and exclude the highest and lowest pixel values from the stretch. Use the two text boxes to edit the upper and lower percentages.
- Optionally, do any of the following:
- Click the ramp under Color scheme and choose a different color ramp. Optionally, click Reverse ramp colors to change the direction of the colors.
- Turn on the Apply dynamic range adjustment toggle button to use dynamic range adjustment in which the stretch method is applied for pixel values only in the active map display.
- Adjust the Gamma value slider to highlight contrast on the imagery layer.
- Type the minimum and maximum pixel values to include in the stretch in the Statistics table. This updates the stretch values in the display.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
RGB
Rendering imagery data using the red, green, and blue (RGB) color composite allows you to use information from multiple bands in your multiband imagery to highlight specific features in the imagery. For example, you can use a natural color composite where the red, green, and blue channels are populated with the red, green, and blue sensor bands to render the image as you would see it naturally. You can also use other combinations to highlight green vegetation, water, or urban areas.
To style multiband imagery data using the RGB style, do the following:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the RGB style, if necessary, and click Style options.
- Select the bands to display in the red, green, and blue channels.
- Optionally, do any of the following:
- Click the Stretch type drop-down menu and select from the list of options.
- Adjust the Gamma value slider to highlight contrast on the imagery layer. You can also turn on the Change individual band gamma values toggle button and type the gamma values for each band.
- Turn on the Apply dynamic range adjustment toggle button to use dynamic range adjustment in which the stretch method is applied for pixel values only in the active map display.
- Type the minimum and maximum pixel values to include in the stretch in the Statistics table. This updates the stretch values in the display.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
Unique Values
Rendering your imagery using unique values is useful for displaying thematic or categorical data. This display option is supported for single-band imagery layers that were published with a raster attribute table. You can base the unique values rendering on one or more attribute fields in the dataset. If the raster attribute table has red, green, and blue values specified in respective fields, the dataset will display using those colors by default. This display type is often used with thematic data such as land cover or risk zones.
To style imagery data using the Unique Values style, do the following:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Unique Values style and click Style options.
- Optionally, do any of the following:
- Select a different field from the Field drop-down menu to use for the unique value display.
- Choose a different color scheme from the Symbol style menu.
- Click the label next to each color and modify the text to add context to the display.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
Classify
The Classify option allows you to group pixel or cell values into a specified number of classes and display each class with a given color. This option is supported for single-band imagery layers. For example, you can classify a temperature raster into regions of low, moderate, and high temperatures, and then add colors to distinguish the classes. If the imagery layer contains continuous data and a histogram has not been calculated, it will be calculated when the classify renderer is selected.
To style imagery data using the Classify style, do the following:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Classify style and click Style options.
- Select the classification method to use to classify pixels from the Method drop-down menu.
The following options are available:
- Natural Breaks—The class breaks are determined statistically by finding adjacent feature pairs between which there is a relatively large difference in data value.
- Equal Interval—The range of cell values is divided into equally sized classes in which you specify the number of classes.
- Quantile—Each class contains an equal number of cells.
- Defined Interval—Specify an interval to divide the range of cell values, and the number of classes will be automatically calculated.
- Manual Interval—Create the class breaks manually by typing the pixel value ranges in the class table.
- Optionally, do any of the following:
- Select a different field from the Field drop-down menu to use for classification.
- Specify the number of groups for classification in the Number of classes option.
- Choose a different color scheme from the Symbol style menu.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
Shaded Relief
Shaded relief is supported for imagery layers containing elevation data. This option generates a representation of the terrain by applying built-in color ramps on the terrain's hillshade, which is useful for highlighting changing terrain. For example, you can apply shaded relief to clearly show areas of high elevation compared to low elevation in a digital elevation model (DEM).
To style elevation imagery data using the Shaded Relief style, do the following:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Shaded Relief style and click Style options.
- Optionally, do any of the following:
- Choose a hillshade option from the Hillshade Type drop-down menu.
The Traditional hillshade type allows you to change the following settings:
- Azimuth—The sun's relative position along the horizon
- Altitude—The sun's angle of elevation above the horizon
- Z Factor—The scaling factor used for converting the elevation unit or for adding vertical exaggeration for visual effect
- Scaling—The pixel size power and factor, which determine how the z-factor scales the shaded relief result
The Multidirectional hillshade type allows you to change the Z Factor and Scaling settings.
- Choose a different color scheme from the Symbol style drop-down menu.
- Choose a hillshade option from the Hillshade Type drop-down menu.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
Colormap
Colormap styling is supported for imagery layers that were published with a color map. It uses the red, green, and blue values in the color map to display a single-band imagery layer. It also allows you to assign labels for each class. For example, you can assign a color to a specific soil type in a soil map, with an associated legend for each soil type label.
To modify the image display using the Colormap style, complete the following steps:
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Colormap style, if necessary, and click Style options.
- Edit the Label column as needed to generate a new legend.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.
Vector Field
Vector field styling uses a magnitude and direction component—or a U and V component, sometimes referred to as the zonal velocity and the meridional velocity—to display data. For example, you can use this style to display ocean or wind currents as arrows in which the direction indicates the flow, and the size or color of the arrow indicates the magnitude, or power, of the current.
- Follow the first four steps of Apply a style.
- In the Styles pane, click the Vector Field style, if necessary, and click Style options.
- Select the type of symbol to represent the magnitude and direction of the variable from the Symbol type drop-down menu. The following options are available:
- Beaufort wind scale—Symbolizes the magnitude and direction of wind using the Beaufort Wind Scale. Magnitude is indicated by color and relative size of the arrow.
- Simple scalar—Symbolizes the magnitude of the data using graduated symbol sizes.
- Single arrow—Symbolizes the magnitude and direction of flow using an arrow having a single color.
- Wind barbs—Symbolizes the magnitude and direction of wind using wind barbs.
- Ocean current (nine classes)—Symbolizes the magnitude and direction of water currents using nine predefined categories. Magnitude is indicated by arrow color.
- Ocean current (four classes)—Symbolizes the magnitude and direction of water currents using four predefined categories. Magnitude is indicated by arrow color.
- Classified arrow—Symbolizes the magnitude and direction of flow using categories based on magnitude limits. Magnitude is indicated by arrow color.
- Select the flow direction of the data from the Direction drop-down menu. The following options are available:
- From (Meteorological)—The direction the flow is from.
- To (Oceanographic)—The direction the flow is traveling.
- Use the Symbol density slider to specify the density of the symbols representing the data.
- Use the Symbol scaling slider to specify the size of the symbols representing magnitude.
- Optionally, click the More properties drop-down arrow and specify the following:
- Set the limits for the magnitude of the data variable. Specify the Minimum and Maximum values.
- Set the units for Input and Output.
- In the Style options pane, click Done when you are finished customizing your style, or click Cancel to go back to the Styles pane without saving your choices.
- In the Styles pane, click Done.